|
OPEN WHEEL MINI MOD RULES 2010
- IMCA Style Bodies
2.
Frame 2X2 or 1 ½ X 2 ½
3.
Body Roof 42” from ground: 4” Roof rake max; 4 Bars in front of driver
4.
Rear Suspension: leaf or 3 link; no gas or canister shocks; no aluminum
shocks; no fiber glass; steel shocks only; no coil overs, no floating suspension
parts; one shock per wheel
- Front Suspension: Must be stock; top A arm can be
aftermarket
- Brakes: front = stock; rear disk okay; aftermarket
master cylinder okay
- Clutch: stock style (no aluminum) Blow proof bell
housing or scatter shield (Mandatory); 7.5 or 8.5 flywheel – 13lbs
- Transmission must be stock: have all working gears; 1”
hole in bell housing
- Engine: 2300 cc max; compression 170 max; stock stroke
.060 overbore; no lightening of any parts; HYD cams only; stock OEM heads
only; stock intakes; flat top pistons or dish; stock oiling system
- Fuel; fuel cells (mandatory); gas only; 1” carb. Spacer;
no electric fuel pumps
- No aluminum shocks or suspension parts
- All parts must be stock
If it don’t say it- don’t run it.
COMMON SENSE APPLIES TO ALL RULES
| 
